FEFire Extinguisher Due

Workplace & Property Compliance Log

Fire Extinguisher Monthly Visual Check & Annual Tag Log Builder

Keep monthly staff visual checks cleanly separated from licensed technician annual tags, print an audit-ready wall clipboard sheet, and export 30/7/1-day renewal alerts.

Fire Extinguisher Monthly Visual Check vs. Annual Tag Log Builder
1. Project & Input Parameters
2. Interactive Verification Checklist

Two Separate Responsibilities to Keep Clear

Monthly Staff Visual Quick-Check

Any trained site manager can verify unobstructed access, intact pull pin and tamper seal, readable instructions, and a gauge needle resting in the green operating band.

Annual Licensed Technician Tag

Annual professional maintenance and new hang-tag punching must be performed by a licensed fire equipment vendor authorized in your jurisdiction.

Separate Kitchen Class K Tracking

Commercial kitchens with deep fryers carry dedicated wet-chemical Class K units—list them explicitly so neither staff nor vendors overlook them.

Keeping Your Inspection Binder Ready Before the Fire Marshal Arrives

Small business owners, restaurant managers, and property supervisors most often fail routine fire extinguisher checks for two avoidable reasons: an expired annual hang tag nobody noticed until inspection day, or missing monthly visual initials. A single printable clipboard sheet paired with calendar alerts eliminates both lapses.

Four-Point Monthly Visual Walkthrough (Takes Under Two Minutes per Unit)

  1. Clear Visibility & Access: Verify no boxes, mop buckets, or stock carts block the wall bracket or floor stand.
  2. Pressure Gauge Check: Confirm the gauge needle points solidly inside the operable green range (for stored-pressure models).
  3. Pin, Tamper Seal & Nozzle: Confirm the locking pin sits fully seated with an unbroken tamper seal and an unobstructed hose or horn.
  4. Physical Condition & Tag Date: Look for dents, rust, chemical residue, or an approaching annual tag expiration month—then initial and date your log.

See our printable Monthly vs. Annual Tag Guide to train new shift supervisors in under five minutes.

Frequently Asked Questions

What is the difference between a monthly check and an annual tag?

A monthly visual inspection is a quick walkthrough performed by on-site staff to confirm each unit is accessible, undamaged, sealed, and properly pressurized. An annual maintenance inspection requires a licensed fire protection technician who updates and punches the official service tag.

Can staff write on the back of the tag or replace an expired tag themselves?

Staff typically initial the monthly inspection grid on the back of the tag or on a wall log, but staff should never hang or punch a new annual compliance tag—that requires a licensed service provider.

Why should Class K units be listed separately?

Commercial kitchen extinguishers serve grease-fire hazards and often sit next to hood suppression pull stations. Tracking them on a dedicated line ensures your vendor brings the correct service equipment.

How do I find my next annual due date?

Look at the month and year punched on the hang tag currently attached to your extinguishers, then enter the upcoming renewal date into the builder above to generate 30/7/1-day calendar alerts.

What about extended internal maintenance or cylinder testing?

Extended maintenance schedules depend on extinguisher type, shell stamp date, and local fire marshal adoption. Ask your licensed fire service technician to confirm upcoming cylinder service dates during your annual tag visit.